Rough Wood - Yellow Pine - 12 in. x 1 1/2 in. x 5/8 in.

Tools

Jack Plane, Smoothing Plane, Square, Gauge, Compass, Tenon-Saw, Dovetail-Saw, Firmer Chisel, Knife, File

(1). Plane up in one piece.

(2). Cut in half with saw.

(3). Set out the feet with square and gauge, and cut out with the saw and knife, using the file to finish with.

(4). Set out for halving, with square and gauge.

(5). Halve with the dovetail-saw and 1/4-inch firmer chisel.

(6). Square the ends with chisel and file.

(7). Set out the curved corners, and round with knife and file.

(8). Smooth off, and fit together.

Note. - In setting out the part cut away for the feet, take the centre of the piece of wood and set off 1 3/4 inches on each side, leaving the final length of feet to be finished at step "6."

No. 9. Pan Stand. (Full size.)

George philip & son liverpool