There are a great many varieties and grades of varnish. Each has its particular use. Those which give the better grades of finish require in their use considerable skill and experience. We cannot advise the use of varnish until one has become quite expert in the use of shellac.

Some "flowing" varnishes give fine finishes without any polishing. Some varnishes are made to be ground down to a smooth surface after drying. These are called rubbing varnishes. Some give a good cheap finish by having the articles dipped in them. Should you decide to use varnish, get it of a reliable dealer who will sell you the grade and kind suitable for your work.

The one point of great importance in all varnishing is that the surface to be varnished must be perfectly polished before any finish is applied if we are to have a proper finish. Use the scraper and sandpaper thoroughly, and do not forget that all defects and especially machine marks will show much more after the varnishing than before.