Steps

Tools

Order Of Exercise

1. Planing a cylinder

1. Pencil, rule, knife, and dividers

1. Square and true stock.

2. Fitting an axle

2. 3-4 inch bit and bit stock

2. Plane stock round for holder.

3. Boring

3. 1-8 and 3-16 inch drills

3. Lay out and cut back and arm.

4. Countersinking

4.Backsaw and turning saw

4. Fit and screw together.

5. File and screw-driver

5. Sandpaper, stain, and polish.

6. Try-square and marking gauge

7. Block and Jack plane