Steps

Tools

Order Of Exercise

1. Cutting miter corners

1. Pencil, rule, knife, and dividers

1. Square and true stock.

2. Beveling

2. 1-8 and 5-16 inch drills

2. Miter corners and bevel edges of base.

3. Fitting swinging arms

3. 3-8 inch bit and bit stock

4. Boring

4. Bit gauge and 1-2 inch chisel

3. Shape bracket and bore holes.

5. Back saw and screw-driver

4. Shape arms to required dimensions.

6. 11/2 inch No. 10 R. H. B. screws

7. Marking gauge and try-square

5. Sandpaper, fit together, and glue.

8. Block and Jack plane

6. Stain and varnish.