Steps

Tools

Order Of Exercise

1. Using turning saw

1. Pencil, rule, knife, and dividers

1. Square and true stock.

2. Boring to certain depth

2. Draw outline with dividers.

3. Use of bit gauge

2. 1-4. 3-8. 1-2. and 3-4 inch bits

3. Using turning saw. saw outside of line.

4. Filing round corners

5. Sandpapering

3. Bit gauge and bit stock

4. Smooth, using spokeshave.

4. Turning saw and try-square

5. File and sandpaper.

6. Bore holes, using bit gauge.

5. File and marking gauge

6. Block and Jack plane

7. Spokeshave