Figs. 1 and 2 are end and front views respectively of a light table that might stand by the bedside for the convenience of an invalid. For the ends, procure four pieces of wood each 2ft. 6in. long, and planed to 11/2 in. by 3/4 in. These are fixed permanently together in pairs with screws (not shown). Only two connecting bars are required, these being 1 ft. 9i in. long, planed to 1 in. by 5/8 in. Fix these to the ends as in Fig. 1. For the foundation of the top obtain a board about 2 ft. long, 1 ft. 3in. wide, and 1/2 in. thick, either in one piece or by glueing two pieces together. This may be covered with oilcloth of the chequered Indian matting pattern, which is easily washed, and which may be fixed down with thin glue. Fig. 3 shows how the bars on the under side are arranged. They are all of 1-in. by 1/2-in. material. First glue and screw on those marked A, B, and C (Fig. 3), and then by long screws fix those marked D and E to the tops of the pieces forming the ends, shown by black rectangular patches. Now place the top in position and glue securely to the bars D and E, and screw from the under side. Run a piece of stop bead l 1/4 in. by 3/4 in. round the top and mitre it at the corners. This gives a good finish and prevents anything sliding off the table. Two coats of blue enamel paint may be given to the article; or, if made in hardwood, it might be polished.

Light Table for Bedroom.