79. How should a student review his previous work to assist in new work? What is the relation between the length and width of a board and its grain? Review processes of making a bench hook, and discuss other ways of obtaining the desired results.

80. Demonstrate the method of drawing a curve through points. How may the elbow be used to assist in drawing curves of certain dimensions? What should be guarded against in sawing a curve?

How should the spokeshave be used with reference to the grain ? In what cases should a wood file, or rasp, be used ?

81. How should cuts be made to insure a perfect joint? What should be the relation of the bottom of a joint to its face?

Describe the method of doweling the top on the foot rest.

82. Should the bottom of a box be cut to its exact size before the rim is made? Why? How should the bottom of the rim of a box be planed to allow a perfect fit? Describe the different kinds of nails used by the carpenter.

83. How should grooves be laid out to insure a perfect fit? Should two pieces be finished flush? Why?

84. How may a wide board be glued up to minimize the tendency to warp ? Should a cleat be glued the entire distance across the end of aboard? Why?

85. Which holds its shape better, a solid piece, or a well glued-up piece?

86. How may pieces be worked in pairs ? How may a piece of gluing be squared by manipulating the clamps? How should a piece of work similar to a screen frame be squared?

87. How may a table top be fastened on without nails or screws showing in its surface?

88. Describe method of laying out a mortise at an angle. What should be done with chips which break off?

89. How should ratchets be cut? Should a door be made exactly the desired size? In gluing up a door, what should be guarded against to insure that it will fit well ? Should a door be hung flush with its frame ?

90. Review dovetailing.

91. How should the lengths of the shelves of a magazine stand be ascertained ?

92. Why is wood filler used? Describe filling and the process of spreading it.

93. What is the difference in the results between staining and filling together, and staining and filling alone?

How may stains be mixed and used ?

94. Describe shellac finish. Should shellac be applied in thick or thin coats? Describe the process of rubbing down.

95. Describe wax finish. In what respect are the ready-mixed wax finishes superior to the homemade ones?

96. Describe the kinds of brushes adapted to different kinds of work. How should brushes be cared for?